[Fixed] Error Code 0xc0000225 on Windows OS

The error code 0xc0000225 is one of the annoying errors that mostly occurs while trying to install the latest version of Windows OS.

It affects the device constantly and restricts the device to be updated. Error 0xc0000225 crashes many active applications that can damage the device badly.

Sometimes, this error code comes with an error notification that says “A required device isn’t connected and it can’t be accessed”. Whenever users get stuck with this error, they find that their device shuts down all of a sudden.

Also, they confront that their PC runs sluggishly and even answer slowly to the keyboard and mouse input.

This situation generally appears due to the improper configuration in the Boot window or corrupt BCD files. Besides, this error code can also generate if the system file gets corrupted or damaged due to certain reasons.

Therefore, if you are one of those users and looking for some reliable workarounds to crack it, then you are on the right page.

Here, in this post, we are going to mention all the potential causes along with their solutions. So, go through this entire post and overcome this error as soon as possible.

Possible Causes of Error Code 0xc0000225

Before proceeding with the troubleshooting steps, you should be aware of the various factors responsible for this error. Furthermore, it will be easier for you to resolve the error if you already know the reasons that can result in the error. 

There can be various factors that can lead to error code 0xc0000225. But, we are going to focus on the most prominent ones. 

• You can find this error due to the missing BCD in your device.
• Damaged or corrupted system files can influence this error.
• Presence of malware or virus can also lead to the error.
• An improper boot of your device can also be responsible for this error code.
• Damaged hardware can also trigger the issue.

These are the most common factors that are responsible for this issue. Now, let’s move on to the next section where you will get to know the troubleshooting methods to settle this error.

Handy Solutions to Fix Error Code 0xc0000225

Now, you are aware of the different circumstances that can be responsible for this error code. Follow up the next section and apply the methods in the same order as instructed to get the best result possible.

Method 1: Run Automatic Repair

This is one of the most meaningful resolutions that you can try to overcome the error you are facing right now. 

Whenever you find this error on your device, you should run the Automatic Repair in your Windows device. To run the Automatic Repair, you can go through the steps underneath.

Step 1:

At first, turn off your Windows device and enter the installation media into the device. You can also utilize the USB Flash Drive for this purpose. On the other hand, you can also use the DVD as the installation media and reboot your device.

Step 2:

If you utilize the USB Flash Drive, then you need to select the function key and boot it. Alternatively, if you are using a DVD or CD, then you will find a notification on the screen that says “Press any key to boot from CD or DVD”.  Now, you have to follow the provided instructions.

Step 3:

Here, you require to choose your preferred language. Simply select the language and then click on the “Repair Your Computer” from the queue window. After that, go to the Troubleshoot option and proceed with the Advanced Options.

Step 4:

Now, locate and select the “Automatic Repair” option from the appeared menu and hit the OK button to confirm the process. Wait for a while until the process gets finished.

Once the process is over, reboot your device and check whether the error gets removed from your device.

Method 2: Refurbishing BCD Files

BCD files are the most essential files to run Windows. Therefore, if there is any bug, then you are not able to access your device. This situation may lead to error code 0xc0000225. 

To get rid of this situation, you need to refurbish the BCD files. Here’s the process to do this task.

Primarily, press the Windows Home key along with the R key to invoke the Run dialogue box. Once the Run box opens, write “cmd” into it and hit the Enter key to open the command. 

Once you are done, a new window will appear on the screen where you require to enter the following commands accordingly. Do not skip to hit the Enter key after each command.

• Firstly, Bootrec/ scanos
• Then, Bootrec/ fixmbr
• After that, Bootrec/ fixboot
• Next, Bootrec/ rebuildbcd

After executing all the above commands, Windows will automatically repair the BCD files. Now, BCD settings will be set to default. Afterward, restart your device and check if you are able to access your device without the error.

Method 3: Run a Disk Check and System File Checker

Even after performing the above two methods, if you still get stuck with the same error code, then you can run the Disk Check and System File Checker to settle this. 

The damaged system files can wind up providing you this error on your device. Hence, it is quite essential to run a System File Checker and Disk Check for resolving the error. 

• At first, boot your device into the Advanced options.
• Then, choose the Command Prompt option from the resultant menu.
• Once the Command Prompt window opens, write the following commands and hit the Enter key after each command.

• sfc/scannow
• Chkdsk c: /f/r

After running these two commands, reboot your device to let the new changes take effect. Once your device restarts, check if this process helps to fix the error.

Method 4: Mark Partition as Active

There is another effective method that you can try to eliminate the error. Some of the affected users have complained that whenever they didn’t mark the partition on their devices as active, they found the error code 0xc0000225.

Therefore, it’s a wise choice to mark the partition on your device as active and check if this helps to eradicate the error. 

• In order to begin the process, press the Windows key along with the R key.
• Then, write “cmd” into the Run window and hit the Enter key. This action will invoke the Command Prompt.
• Next, choose the option “Run As Administrator” from the queue menu.
• After that, enter the following commands in the Command Prompt and hit the Enter key after every time you enter the command.

• Disk part
• List part

Here, in this section, you need to recognize your preferred disk that you want to reformat. You can perform this action by following the below steps:

• select disk (your disk number)
• list partition

After that, type the following commands again in the Command Prompt window.

• select partition (your disk number)
• activate

This process will help you to activate the partition on the disk. Therefore, when the process is over, review whether the error gets removed or not.

 

End Notes:

Hopefully, after going through the above methods, you are able to eradicate the error code 0xc0000225. But, if you have any kind of confusion regarding the error, then you can share your difficulties in the feedback section below.